MR16 / GU10 IP44 Bathroom Downlight Frame – Satin Nickel
IP44 splash-rated MR16/GU10 recessed frame (Satin Nickel)
MR16 / GU10 IP44 Bathroom Downlight Frame – Satin Nickel
Need help choosing? Contact us for advice.
Overview
Satin nickel recessed downlight frame designed for MR16 (G5.3) lamps and compatible GU10 bulbs (with the correct lampholder). With an IP44 rating, it’s a solid option for bathrooms, cloakrooms and other areas where splash protection is recommended.
- IP rating: IP44 (splash protection)
- Lamp compatibility: MR16 (G5.3) / GU10 (with separate GU10 lampholder)
- Cut-out (hole size): Ø70–75mm
- Face size: 85 × 85mm
- Height: 36mm
- Material: Pressed steel
- Shape: Round
- Finish: Satin nickel
Lampholder note (important)
G5.3 (MR16) lampholder is included. If you are fitting a GU10 bulb, the GU10 lampholder must be purchased separately.
Where to use
Ideal for bathrooms and utility areas. For bathroom zone guidance, see: IP44 vs IP65 bathroom zones guide.
Cut-out sizing
Before ordering, confirm your ceiling cut-out. This guide helps: Downlight cut-out sizes (what fits).
Note: Downlight frame supplied only (lamp not included unless stated elsewhere).
Technical specifications
| IP rating | IP44 |
|---|---|
| Lamp compatibility | MR16 (G5.3) / GU10 (with separate GU10 lampholder) |
| Lampholder included | G5.3 (MR16) |
| For GU10 bulbs | GU10 lampholder required (sold separately) |
| Finish | Satin nickel |
| Shape | Round |
| Material | Pressed steel |
| Lamp diameter | 50 mm |
| Ceiling cut-out (mounting hole) | 70–75 mm |
| Dimensions (L × W × H) | 85 × 85 × 36 mm |
| Weight | 106 g |
| Installation type | Recessed ceiling |
| Bulb included | No |
| Dimensions | 85 × 85 × 36 mm (cut-out Ø70–75 mm, lamp Ø50 mm) |
Warranty
60 months (~5 years)