Patina MR16 / GU10 Recessed Ceiling Downlight
Recessed patina-effect ceiling frame for 50 mm MR16 or GU10 lamps
Patina-effect recessed frame
Patina MR16 / GU10 Recessed Ceiling Downlight
Recessed patina-effect ceiling frame for 50 mm MR16 or GU10 lamps
Ref: P1348_PATINA
Need help choosing? Contact us for advice.
Overview
This patina-effect recessed ceiling downlight takes standard 50 mm MR16 or GU10 lamps and gives ceilings an aged, characterful metal finish.
- Works with MR16 (12 V) lamps as supplied – GU10 use requires a separate lampholder.
- G5.3 lampholder included and pre-wired for MR16 lamps.
- Pressed steel body with a patina-effect square front bezel and round lamp aperture.
- Recommended ceiling cut-out: 55–60 mm circular opening.
- Front plate dimensions: 85 × 85 × 30 mm.
- Designed for 50 mm lamps with a fixed, straight-down light beam.
- Approximate fitting weight: 59 g.
Ideal for lounges, hallways, stairwells and other indoor dry rooms where a patina metal finish suits the interior style.
Lamps and GU10 lampholders are purchased separately.
Technical specifications
Lamp compatibility: MR16 / GU10 (lamp not supplied)Included lampholder: G5.3, wired for MR16
GU10 lampholder: Ordered separately as an accessory
Ceiling cut-out size: 55–60 mm circular opening
Lamp aperture: For 50 mm diameter lamps
Overall size: 85 × 85 × 30 mm front plate
Construction material: Pressed steel
Visible finish: Patina effect
Adjustment type: Fixed, non-tilting downlight
Approximate weight: 59 g
Recommended environment: Indoor, dry locations only
Ceiling suitability: Designed for plasterboard ceilings
Installation note: To be installed and wired by a competent person
Warranty
60 months (~5 years)
Covered by a 5-year warranty against manufacturing defects, provided the fitting is installed and used in accordance with current electrical regulations.